Huawei E960 HSDPA User Manual page 45

Preamble Type: It has two options: Long and Short. In the case that the client (PC)
supports the Short type, the WLAN can have a better performance if it is Short.
MAX Associations Limit: It refers to the maximum number of connections. It is used to
set the maximum number of concurrent WLAN users on the gateway. A maximum of 32
clients can connect with the gateway in wireless mode.
Mode: It refers to the WLAN accessing mode. The gateway can work in two modes, as
shown in the following table. The default value is Access Point.
Mode
Wireless Bridge
Access Point
Bridge Restriction: It refers to the limitation to the peer MAC addresses. When it is
Disabled, the E960 can access all the remote bridges; when it is Enabled, the E960 can
only access the remote bridges that the addresses are in the address list.
Bridges: It refers to the physical address of the remote peer bridge. The gateway
supports the point-to-multipoint (PTM) bridge mode, and a wireless gateway can connect
four remote peer bridges at the same time.
It is used to connect two or more access points.
The access points meeting the IEEE 802.11b/g standard or the
wireless terminals can connect the wireless gateway.
Description
39