Figure 29. "Show Interfaces Ets Detail - Dell Force10 MXL Deployment Manual

Deploying FCoE (FIP Snooping) on Dell Force 10 MXL
The following command will show vital information on the ETS settings in the configuration. Type:
show interfaces ets detail. This command will show more specific detail about the ETS configuration
that has been negotiated between the devices. In this example interface TenGigabitEthernet 0/3 is
used as a downlink to a host server and CNA installed in that system. Interface TenGigabitEthernet
0/52 is the uplink into the top-of-rack FCF switch.
Some key items in these results will be TC-grp, Priority#, Bandwidth, and TSA. Note that only these two
interfaces are seen typically this command will list them all.
MXL-B1-Rack3015#
Interface TenGigabitEthernet 0/3
Max Supported TC Groups is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
TC-grp Priority#
------------------------------------------------
0 0,1,2,3,4,5,6,7
1
2
3
4
5
6
7
15
Remote Parameters :
-------------------
Remote is enabled
TC-grp Priority#
------------------------------------------------
0 0,1,2,4,5,6,7
1 3
2
3
4
5
6
7
15
Figure 29. "show interfaces ets detail"
show interfaces ets detail
Bandwidth
100%
-
-
-
-
-
-
-
-
Bandwidth
50 %
50 %
-
-
-
-
-
-
-
TSA
ETS
-
-
-
-
-
-
-
-
TSA
ETS
ETS
-
-
-
-
-
-
-
32