Figure 15. "Show Interface Brief" Command - Dell Force10 MXL Deployment Manual

Deploying fcoe (fip snooping)
Hide thumbs Also See for Force10 MXL:
Table of Contents

Advertisement

Deploying FCoE (FIP Snooping) on Dell Force 10 MXL
Basic Validation for the Cisco Nexus 5000 series switch configuration
In order to have a fully supported configuration the cables or SFP+ transceivers must only be Cisco-
branded products for the Cisco Nexus. The following command is used to give a port status overview:
show interface
brief.
This example has been shortened from the actual results but will display the results of active ports and
VFC interfaces. Verify that the ports which are expected to have links show up correctly.
Nexus5548-top#
show interface brief
-------------------------------------------------------------------------------
Interface
Vsan
------------------------------------------------------------------------
fc2/15
2
fc2/16
2
------------------------------------------------------------------------
Ethernet
VLAN
Interface
------------------------------------------------------------------------
Eth1/1
20
Eth1/2
20
Eth1/3
1
Eth1/4
1
*rest of the ports removed for sizing
------------------------------------------------------------------------
Port-channel VLAN
Interface
------------------------------------------------------------------------
Po2
20
------------------------------------------------------------------------
Port
VRF
------------------------------------------------------------------------
mgmt0
--
----------------------------------------------------------------------Interface
Vsan
Admin
Admin
Mode
Trunk
Mode
----------------------------------------------------------------------
vfc1
2
Figure 15.
"show interface brief" command
Admin
Admin
Status
Mode
Trunk
Mode
auto
auto
up
auto
auto
up
Type Mode
eth
trunk
eth
trunk
eth
access up
eth
access down
Type Mode
Status
eth
trunk
up
Status IP Address
up
172.25.188.100
Status
F
on
trunking
SFP
swl
swl
Status Reason
up
none
up
none
none
SFP not inserted 10G(D) --
Reason
none
SFP
Oper
Mode
Speed
(Gbps)
--
Oper
Oper
Mode
Speed
(Gbps)
F
4
F
4
Speed
Port
Ch #
10G(D) 2
10G(D) 2
10G(D) --
Speed
Protocol
a-10G(D)
lacp
Speed
MTU
1000
1500
Oper
Port
Channel
TF
auto --
Port
Channel
--
--
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Force10 mxl 10 gbe

Table of Contents