Led Error Messages; Image Problems - BOXLIGHT Broad View User Manual

LED Error Messages

LED
NUMBER OF FLASHES
Ready
Power

Image Problems

Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power up again in the correct order.
Problem: The image is blurred
1. Adjust the Focus on the projector.
2. Press the Auto button on the remote control or projector.
3. Ensure the projector-to-screen distance is within the 10-meter (33-feet) specified range.
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the projector so it is as perpendicular to the screen as possible.
2. Use the Keystone button on the remote control or projector to correct the problem.
Problem: The image is reversed or upside down
Check the Projection setting on the Utility menu of the OSD.
Problem: The image is streaked
1. Set the Frequency and Tracking settings on the Utility menu of the OSD to the default
settings.
S /
TATUS
Flashing Lamp not ready—do not press the power button
1 T1 sensor error / Ballast Fan error / Lamp off(Option)
2 Burner Fan error
3 Ballast UART error / Lamp Fan error
4 Power Fan error
2 Environment Task Created Fail
3 System overheating
4 T1 sensor error
5 Ballast UART error / Lamp off(Option)
6 Fan Error
D
D
D
D
ESCRIPTION
– 33 –
L P P r o j e c t o r – U s e
L P P r o j e c t o r – U s e
L P P r o j e c t o r – U s e
r ' s M a n u a l
r ' s M a n u a l
r ' s M a n u a l