Table of Contents
Advertisement
iNSTALL LEVELING LEGS
Excessive Weight Hazard
Use two or more people to move and install dryer.
Failure to do so can result in back or other injury.
1,
Prepare dryer for leveling legs
\
2,
Screw in leveling legs
Examine leveling legs, find diamond marking. Screw legs into
leg holes by hand. Use a wrench to finish turning legs until
diamond marking is no longer visible.
Now stand the dryer on its feet. Slide the dryer until it is
close to its final location. Leave enough room for electrical
connection
and to connect the exhaust vent.
To avoid damaging floor, use a large flat piece of cardboard
from dryer carton; place under entire back edge of dryer.
Firmly grasp dryer body (not console panel) and gently lay
dryer down on cardboard.
6
Hide quick links:
Advertisement
Table of Contents
