Venting; Venting Requirements - Maytag MEDX700XL0 Installation Instructions Manual

27" wide electric dryer models
Table of Contents

Advertisement

VENTING
Venting
Requirements
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metamfoil vent.
Failure to follow these instructions can result in death
or fire.
WARNING:
To reduce the risk of fire, this dryer MUST BE
EXHAUSTED OUTDOORS.
IMPORTANT:
Observe all governing codes and ordinances.
Exhaust
hoods:
[]
Must be at least 12" (305 ram) from ground or any object that
may obstruct exhaust (such as flowers, rocks, bushes, or
snow).
Recommended
Styles:
Louvered hood
Acceptable
Style:
Box hood
Dryer exhaust must not be connected
into any gas vent,
chimney, wall, ceiling, attic, crawlspace,
or a concealed space
of a building. Only rigid or flexible metal vent shall be used for
exhausting.
!
(
(102 ram)
{
4" (102 mm) heavy metal exhaust vent
[]
Only a 4" (102 mm) heavy metal exhaust vent and clamps
may be used.
[]
Do not use plastic or metal foil vent.
Rigid
metal
vent:
[]
Recommended
for best drying performance
and to avoid
crushing and kinking.
Flexible
metal
vent: (Acceptable only if accessible to clean)
[]
Must be fully extended and supported
in final dryer location.
[]
Remove excess to avoid sagging and kinking that may result
in reduced airflow and poor performance.
[]
Do not install in enclosed walls, ceilings, or floors.
[]
The total length should not exceed 73/4ft. (2.4 m).
NOTE:
If using an existing vent system, clean lint from entire
length of the system and make sure exhaust hood is not
plugged with lint. Replace plastic or metal foil vents with rigid
metal or flexible metal vents. Review "Vent System Chart" and
if necessary, modify existing vent system to achieve best drying
performance.
Angled hood
Elbows:
[]
45 ° elbows provide better airflow than 90 ° elbows.
............
Be
Clamps:
[]
Use clamps to seal all joints.
[]
Exhaust vent must not be connected or secured with screws
or other fastening devices that extend into interior of duct
and catch lint. Do not use duct tape.
improper venting
can cause moisture
and lint to collect
indoors, which may result in:
[] Moisture damage to woodwork,
furniture, paint, wallpaper,
carpets, etc.
[] Housecleaning
problems and health problems.
See "Venting Kits" for more information.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wed5700ac0Medx700xw0Medx700ag0

Table of Contents