LG FREEZER Owner's Manual page 50

6. Procedure to install
1. Loosely release the screws
of the hinge on the case part of
the refrigerator and then separate
the door by pushing it to the right
(See Figure 20).
2. Release the screws No.
completely and then fix them
loosely to the reverse side (See
Figure 21)
3. Loosen the screws
fixed to the door to disconnect
the hinge.
4. Move the separated hinges
(Figure 24) diagonally and fix it to
the door by turning the hinge by
180°. Fix the hinge to the door
with screws No.
5. Align the door hinge with screws
No. , on the case and push
from left to right to lock in.
6. Adjust the up/down or the
left/right interval of the
refrigerator door so that leaning
should not occur to either side,
and then tighten screws.
7. After fixing the hinge, insert the
screw caps (two spots) at the
opposite holes of the hinge.
,
,
and
, .