HP CD-WRITER Plus User Manual page 7

What SCSI ID should I use for the CD-Writer Plus?
When you place Software Disc 1 in your CD-ROM and click Start
Installation, the software will check your system and recommend a
SCSI ID you can use on the CD-Writer Plus.
Example:
SCSI ID 3 is available.
Alternatively, if you have already installed the software, you can get a list
of all the detected SCSI devices in your computer and the IDs they use.
Click the Start button on your taskbar, select Programs, HP CD-
Writer Plus, Utilities, and select List SCSI Devices. Choose an
available SCSI ID for your CD-Writer Plus.
Example:
The following SCSI devices were detected:
0 --------------> Hard drive
1 --------------> CD-ROM
4 --------------> Tape drive
7 --------------> SCSI card
You could use SCSI ID 2, 3, 5, or 6 for your CD-Writer Plus.
How do I set the SCSI ID on the CD-Writer Plus once I know
which SCSI ID to use?
Locate the SCSI ID switch on the back of the CD-Writer Plus. Use a pen to
press the buttons on top or bottom of the SCSI ID switch. The ID setting
will roll forward or backward, depending on the button you press.
View of the back of the drive showing the SCSI ID switch.
How to Set the SCSI ID
7