HP CD-WRITER Plus User Manual page 23

Recovery Set. Click Cancel to exit, remove any diskettes and CDs from your
drive(s) and restart your computer. If you are performing an actual recovery,
proceed to the next step.
9. Follow the instructions on the Wizard screens to complete the Disaster
Recovery.
When the Disaster Recovery is complete, the HP Disaster Recovery
Wizard will report that your data was either successfully recovered, in
which case you may remove any diskettes and CDs from your drive(s)
and restart your computer, or a Report button will appear.
If a Report button does appear on the Wizard screen, click on Report to
view any files that could not be recovered. For more information on any
files that could not be recovered, see the following section: "Files Not
Recovered".
Files Not Recovered
HP Disaster Recovery will report any file(s) that could not be recovered,
along with a brief explanation for the reason the file(s) could not be
recovered in the REPORT.TXT file.
To view this file:
For Windows 95/98—After recovering the volume(s), you must first
exit the program by pressing Esc twice, then type
After reading the text, press Alt
For Windows NT—When the recovery is complete, the final Wizard
screen will display a Report button if there were any files that could not
be recovered. Click on Report to view this file.
Busy Files—If any files were inaccessible at the time you created
your Disaster Recovery Set, or at the time of the recovery process,
these files will be listed in the Report file as not having been
recovered.
Damaged Media—If the media containing your Disaster Recovery
Set is damaged, some of the data on that media may not be
recoverable. Any files that could not be recovered due to damaged
media will be listed in the Report file. To recover these files, close all
running applications and use an older Disaster Recovery Set to
perform another recovery.
Recovering Your Data
+
F
EDIT REPORT.TXT
, then press X to exit the editor.
23
.