Figure 3.23: Tftpd32 Top-Level Settings And Dhcp Server Tab - Wegener DTV 720 User Manual

DTV 720 U ' M
SER S ANUAL
3. If your local computer is attached to a network,
4. Use your unzip utility to extract the
5. Start and setup the
800043-01 Rev. C
nect the network cable from the computer and reset the computer before proceeding
to the following steps. The upgrade may not start up correctly if the computer isn't
reset first.
TFTPD32.exe
a. Run
TFTPD32.exe
b. When the window (
TFTPD32
field to the
DTVSoftware
xxx.cf in . above.
Step 1
Figure 3.23: TFTPD32 Top-level Settings and DHCP Server Tab
c. Look at the Server interfaces: field, which should contain your PC's IP address.
(The program should automatically set this from the information in your
TFTPD32
d. Click the button to bring up the
Settings
.
Figure3.24
e. Under
Global Settings
and are checked to be
DHCP Server
.
OFF
f. Under
TFTP Security
g. Under
TFTP Configuration:
to .
Tftp port 69
Wegener
TFTPD32.exe
program on the PC:
below) opens, set the Current Directory:
Figure3.23
directory where you placed the application code
Location of software
upgrade.
TFTPD32: Settings
, click the checkboxes so that
, and that
ON
, click the radio button for
set
Timeout (seconds)
38
recommends that you discon-
file from the
TFTPD32.zip
Your PC's IP address
IP address of DTV unit
DTV Software upgrade
screen shown in
,
TFTP Server Syslog Server
is not checked, or
TFTP Client
.
Standard
to ,
3 Max Retransmit
www.wegener.com
file.
-
DTV 720
.)
PC
,
to , and
6