Advertisement
5
Apply the film to the window, with the
protective layer with the green tab facing
out.
6
If necessary, move the film to the ideal
viewing location while the windscreen is still
wet.
7
Use a card to scrape the bubbles out to the
edge of the film.
Only remove the bubbles when the top
protective layer on still on the film.
The fewer bubbles under the film, the better
the view of the data.
8
Pull the green tab to remove the final
protective layer from the film.
/
/
'
/
/
..
/
/
Connecting the Reflector Lens
You can use the snap-on reflector lens instead
of the windscreen film. This allows you to use
the head-up display in other vehicles or in areas
where the film is not permitted.
Snap the reflector lens onto the device.
3
Advertisement
