Going to a Saved Location ............ 4 Going to a Business or Named Location ....... 4 Going to a City or Intersection ..........4 Going to an Address or Location Using the Garmin Speak App ..................4 Following Your Route ..............4 Navigation Symbols ...............
• Choose a location that is within easy reach and provides adhesive to detach from the windshield. access to the device buttons. Installing and Powering the Garmin Speak Device • Choose a location that allows the device to clearly hear your voice.
The Garmin Speak device requires a connection to the Garmin Connecting to the Stereo Using an Auxiliary Audio Speak app to operate. To use the device, you must pair it with your smartphone using the Garmin Speak app and complete the Cable initial setup.
You can also turn the device on or off manually. This is useful and more. when the device is connected to an always-on power outlet. You can specify the Garmin skill as part of a request to the • To turn off the device, hold for two seconds.
Going to a Saved Location voice prompts and on-screen information. It is useful to start a route on your Garmin Speak device each • Refer to the on-screen information to prepare for your next time you travel to a saved location, even though you may turn.
You can ask the device to calculate an alternate route to take a detour, such as avoiding a traffic delay or a road closure. If a If you enable the Garmin Speak for phone calls, you can accept significant traffic delay is reported on your route, the device...
• To enable a skill using your voice, say a phrase like Alexa, device. enable the Garmin skill. Your phone accepts the call, and you can speak to the caller • To browse and enable skills from the Amazon Alexa app, using the Garmin Speak microphones and speaker. If the select Skills from the Amazon Alexa app menu.
Garmin Speak app Device Care (Pairing with Your Smartphone, page NOTICE ◦ Verify the Garmin Speak device volume is loud enough to hear. Avoid dropping your device. You can say Alexa, turn it up or use your smartphone Do not store the device where prolonged exposure to extreme volume controls to increase the volume.
If necessary, remove the old adhesive pad from the disc. Each time the Garmin Speak turns on, it attempts to connect to Clean the disc. the most recently connected smartphone first. If that smartphone The disc must be free of dust, wax, oils, or coatings.
Page 13
Remove one side of the protective film from the new adhesive pad. Position the adhesive pad over the disc. TIP: The adhesive is extremely sticky. Do not touch the adhesive to the disc until the adhesive pad is properly aligned. Press the adhesive pad firmly onto the disc, and maintain pressure for 30 seconds.