Background Task Priority; Maximum Sata Mode - Areca ARC-1110 User Manual

BIOS CONFIGURATION

3.7.5.5 Background Task Priority

The "Background Task Priority" is a relative indication of how
much time the controller devotes to a rebuild operation. The
SATA RAID controller allows the user to choose the rebuild prior-
ity (ultralow, low, normal, high) to balance volume set access
and rebuild tasks appropriately.

3.7.5.6 Maximum SATA Mode

The Controller can support up to SATA ll, which runs up to
300MB/s, twice as fast as SATA150. NCQ is a command proto-
col in Serial ATA that can only be implemented on native Serial
ATA hard drives. It allows multiple commands to be outstanding
within a drive at the same time. Drives that support NCQ have
an internal queue where outstanding commands can be dynami-
88
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main Menu Raid System Function
Raid Rebuild Priority
Quick Volume/Raid Setup Mute The Alert Beeper
UltraLow(5%)
Raid Set Function Alert Beeper Setting
Low(20%)
Volume Set Function Change Password
Medium(50%)
Physical Drives JBOD/RAID Function
High(80%)
Background Task Priority
Raid System Function
Raid System Function Background Task Priority
Ethernet Configuration
Maximum SATA Mode
View System Events HDD Read Ahead Cache
Clear Event Buffer Stagger Power on
Hardware Monitor Empty HDD slot LED
System information HDD SMART Status Polling
Controller Fan Detection
Disk Write Cache Mode
Capacity Truncation
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Raid System Function
Main Menu
Maximum SATA Mode
Mute The Alert Beeper
Quick Volume/Raid Setup
Alert Beeper Setting
Raid Set Function
SATA150
Change Password
Volume Set Function
SATA150+NCQ
SATA150+NCQ
JBOD/RAID Function
Physical Drives
SATA300
Raid System Function Background Task Priority
Raid System Function
SATA300+NCQ
Maximum SATA Mode
Maximum SATA Mode
Ethernet Configuration
HDD Read Ahead Cache
View System Events
Stagger Power on
Clear Event Buffer
Empty HDD slot LED
Hardware Monitor
HDD SMART Status Polling
System information
Controller Fan Detection
Disk Write Cache Mode
Capacity Truncation
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw