Raid System Function; Mute The Alert Beeper - Areca ARC-1110 User Manual

3.7.5 Raid System Function

To set the raid system function, move the cursor bar to the main
menu and select the "Raid System Function" item and then
press Enter key. The Raid System Function menu will show mul-
tiple items. Move the cursor bar to an item, then press Enter key
to select the desired function.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw

3.7.5.1 Mute The Alert Beeper

Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
The Mute The Alert Beeper function item is used to control the
SATA RAID controller Beeper. Select yes and press the Enter
key in the dialog box to turn the beeper off temporarily. The
beeper will still activate on the next event.
BIOS CONFIGURATION
Areca Technology Corporation RAID Controller
Areca Technology Corporation RAID Controller
Raid System Function
Mute The Alert Beeper
Mute Alert Beeper
Alert Beeper Setting
Change Password
Yes
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
HDD Read Ahead Cache
Stagger Power on
Empty HDD slot LED
HDD SMART Status Polling
Controller Fan Detection
Disk Write Cache Mode
Capacity Truncation
No
85