Jbod/Raid Function - Areca ARC-1110 User Manual

rect password. This feature is used to protect the internal RAID
system from unauthorized access. The controller will check the
password only when entering the Main menu from the initial
screen. The system will automatically go back to the initial
screen if it does not receive any command in 20 seconds.
To set or change the password, move the cursor to "Raid System
Function" screen, press the "Change Password" item. The "Enter
New Password" screen will appear.
To disable the password, only press Enter in both the "Enter
New Password" and "Re-Enter New Password" column. The ex-
isting password will be cleared. No password checking will occur
when entering the main menu.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw

3.7.5.4 JBOD/RAID Function

JBOD is an acronym for "just a Bunch Of Disks". It represents
a volume set that is created by the concatenation of partitions
on the disk. The operating system can see all disks when the
JBOD option is selected. It is necessary to delete any RAID
set(s) on any disk(s) if switching from a RAID to a JBOD con-
figuration.
BIOS CONFIGURATION
Areca Technology Corporation RAID Controller
Raid System Function
JBOD/RAID Function
Mute The Alert Beeper
RAID
Alert Beeper Setting
JBOD
Change Password
JBOD/RAID Function
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
HDD Read Ahead Cache
STagger Power on
Empty HDD slot LED
HDD SMART Status Polling
Controller Fan Detection
Disk Write Cache Mode
Capacity Truncation
87