Capacity - Areca ARC-1110 User Manual

• Capacity

Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
The maximum available volume size is the default value for the
first setting. Enter the appropriate volume size to fit your ap-
plication. The capacity value can be increased or decreased by
the UP and DOWN arrow keys. The capacity of each volume
set must be less than or equal to the total capacity of the raid
set on which it resides.
If volume capacity will exceed 2TB, controller will show the
Greater 2 TB volume Support sub-menu.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
BIOS CONFIGURATION
Areca Technology Corporation RAID Controller
Volume Set Function
Volume Creation
Create Volume Set
Create Volume From Raid Set
Delete Volume Set
Volume Name : Volume Set # 00
Modify Volume Set
Raid Set
Raid Level
Check Volume Set
Raid Set
Capacity
Capacity
StopVolume Check
Stripe Size
Display Volume Info.
SCSI Channel
SCSI ID
SCSI LUN
Cache Mode
Tag Queuing
Areca Technology Corporation RAID Controller
Total 4 Drives
Raid 0
Raid 1 + 0
Raid 1 + 0 + Spare
Raid 3
Raid 5
Raid 3 + Spare
Raid 5 + Spare
Raid 6
Available Capacity : 160.1GB
Selected Capacity : 160.1GB
# 00
: 5
# 01
: 160.1GB
: 160.1GB
: 64K
: 0
: 0
: 0
: Write Back
: Enabled
Greater Two TB Volume Support
No
Use 64bit LBA
For Windows
For Windows
73