For Windows - Areca ARC-1110 User Manual

ARCHTTP PROXY SERVER INSTALLATION

5.1 For Windows

You must have administrative level permissions to install SATA
RAID software. This procedure assumes that the SATA RAID hard-
ware and Windows are installed and operational in your system.
Screen captures in this section are taken from a Windows XP instal-
lation. If you are running another version of Windows, your instala-
tion screen may look different, but the ArcHttp proxy server instal-
lation is essentially the same.
1. Insert the RAID subsystem CD in the CD-ROM drive.
2. Run the setup.exe file that resides at: <CD-ROM>\PACKAGES\
Windows\http\setup.exe on the CD-ROM.
3. The screen shows Preparing to install.
Follow the on-screen prompts to complete ArcHttp Proxy Server
software installation.
A program bar appears that measures the progress of the
ArcHttp setup. When this screen complete, you have completed
the ArcHttp Proxy Server software setup.
4. After a successful installation, the Setup Complete dialog box
is displayed.
Click the Finish button to complete the installation.
5. See the next chapter detailing the McRAID storage manager to
customize your RAID volume set.
109