Activating / Deactivating The Alarm; The Snooze Function - Oregon Scientific RM818P User Manual

3. Adjust the minute of the alarm time by using the
UP and DOWN buttons.
4. Press the ALARM button when done.
5. Select the alarm types (sound only; vibration alarm
only or both) by using the UP and DOWN buttons.
6. Press the ALARM button when done.
The alarm time should now be displayed.

ACTIVATING / DEACTIVATING THE ALARM

To set the alarm on:
1. Press the ON / OFF button.
RM818P English R7
NOTE
date on the lower half of the LCD display. The first bell
will turn on the alarm for Alarm #1. If you press the
second alarm as well (as shown by the appearance of
the second bell icon beside the date but below the bell
icon for the first alarm).

THE SNOOZE FUNCTION

While the alarm is ringing, press the SNOOZE / LIGHT
button to stop the Alarm sound and enable the Snooze
function.
When the Snooze function is enabled, the Snooze alarm
will last between 8 and 9 minutes. Also, the snooze
function will be disabled if 1) the clock time is changed;
2) or the
NOTE
Icon will be flashing.
15
15
You will see the bell icon appear beside the
ON / OFF button a second time, you will activate the
ON / OFF button is pressed.
When the Snooze function is enabled, the Bell
7/14/04, 3:58 PM