Adaptor - Oregon Scientific RM818P User Manual

1. Locate the battery compartment.
2. Install the batteries by matching the correct
polarity. Always use the correct battery type
(2 x UM-4 AAA-sized 1.5V batteries).
WARNING Reversing the polarity may damage the
product.
NOTE
Replace the batteries whenever the low battery
icon is shown , the display is dim, or the display
does not illuminate when the power is on. Replace all
the batteries at the same time-it is dangerous to mix old
and new batteries.
RM818P English R7

ADAPTOR

By plugging in the adaptor, the projector will project the
time on the wall / ceiling continuously.
7
7 7/14/04, 3:58 PM