Alarm Time Setting; Using Alarm Function - Oregon Scientific EW96 User Manual

and calendar can be set manually. As soon as the
signal of sensor is received again, the clock will
automatically synchronize with the exact time and
calendar.
1. In normal time mode, press "SET CLOCK"
key once to enter the time setting mode.
2. Press "+" or "-" key to change the settings.
3. Press "SET CLOCK" to confirm. The setting
order is: 12/24-hr format, time, +/-23 hours
time difference, year, day/month format, date.
4. Press "SET CLOCK" key to save and exit the
setting mode.
12/24 Hr setting Time setting
Month-Date setting MD/DM setting
Note
1. During the setting period, press and hold "+" or
"-" key to speed up the change of settings.
2. Through "+/-23 hours time difference" setting,
the precise time of another area will be shown.
1.
2.
3.
Time difference setting
1.
2.
Year setting
1.
2.
3.
5

ALARM TIME SETTING

In normal time mode, press "SET ALARM"
key once to enter the alarm time setting
mode.
Press "+" or "-" key to set hour/minute.
Press "SET ALARM" key to save and exit the
setting mode. " " indicates alarm is ON.
Normal time mode
Note
The alarm will be automatically turned on when
you set the alarm time.
During the alarm time setting period, press
and hold "+" or "-" key to speed up the change
of settings.

USING ALARM FUNCTION

Set the alarm time as the above section.
In normal time mode, press "ALARM ON/OFF"
key once to display the current alarm time.
Press it again to turn alarm ON/OFF.
Alarm time setting