Oregon Scientific RM818P User Manual page 12

4. Press the ALARM button to exit the set mode.
To select the time zone:
1. Press and hold the CLOCK button for 2 seconds.
The time-zone offset hour digits will blink. Use
the UP and DOWN buttons to select your time zone
(e.g. +1, the time displayed will be the RF clock
time plus 1 hour).
2. Press the ALARM button to exit the set mode.
TIME ZONE SETTING MODE
To select time format:
1. Press and hold the CLOCK button for 2 seconds.
2. Press the CLOCK button once again.
RM818P English R7
3. Use the UP and DOWN buttons to select the time
4. Press the ALARM button to exit the set mode.
TIME FORMAT SETTING MODE
To set the current date:
1. Press and hold the CLOCK button for 2 seconds.
2. Press CLOCK four more times.
3. Use the Up and Down buttons to select the year.
4. Press the CLOCK button to set the date format by
5. Press the CLOCK button to set month using the
6. Press CLOCK again to set the date, and then press
11
11
format (whether 12-hour to 24-hour format).
using the UP and DOWN buttons.
UP and DOWN buttons.
ALARM button to exit the set mode.
7/14/04, 3:58 PM