Alarm Function; Setting And Activating The Alarm - Oregon Scientific RM926 User Manual

HOW TO S
NOTE Time-zone hour offset can be adjusted +/- 23
hours. The Zone time is the current clock time based on
the radio reception signal, and local time is equal to the
Zone time plus the Hour Offset.
RM926(EN4) 7

ALARM FUNCTION

The unit is equipped with dual 2-minute alarms
with 8-minute snooze function. For each alarm you
may select from 5 polyphonic melodies (Circus, Carnival,
Turkish, Jazz and Entertainer) plus a beeping alarm.

SETTING AND ACTIVATING THE ALARM

1. From any clock display mode, press ALARM to view
the alarm time on the lower line of the LCD. The
Month-day / Day-month calendar mode changes to
alarm display mode. "– : – –" appears to indicate that
no alarm time has been set.
2. Press to show the alarm time "6:00" (default
setting) and . Press and hold ALARM for 2
seconds until the alarm hour value blinks.
3. Use or to adjust the each of the settings in the
following order: hour, minute, melody, and alarm
volume level (Lo / Hi), pressing ALARM each time to
confirm and go to the next setting.
7
2/3/05, 11:21 AM
and