Table of Contents
Advertisement
Chapter 3 Installation and Configuration
JP6 - PIOVDD Source
JP6 is used to select the source for the PIOVDD supply voltage.
When the jumper is at position 1-2, the PIOVDD voltage must be provided to the H6 connector, pin 1.
When the jumper is at position 2-3, the PIOVDD voltage is provided by the 3.3V power supply of the board.
JP6
Figure 3-4: Configuration Jumper Location (JP6)
S5U13719P00C100 Evaluation Board User Manual (Rev. 1.1) EPSON
11
Advertisement
Table of Contents
