KitchenAid KUDS30FXWH1 Installation Instructions Manual page 24

Check thatgrounding clipisattached tothelower p anel.
Position t helower p anel behind t heaccess panel. Onsome
models t here isinsulation ontheaccess panel which must
fallbehind t heinsulation onthelower p anel.
Hold the2panels t ogether andplace t hem against
dishwasher leg. U sing a Phillips o r
W' screwdriver, reinstall
the screws through the holes in the access panel and the
slots in the lower panel.
Check that the lower edge of the lower panel contacts
the floor. Adjust if necessary.
Tighten access panel screws.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
1__JPower
supply cord--Plug intq
a grounded
3 prong outlet _
Plug into a grounded 3 prong outlet. Check that power
supply cord does not touch dishwasher motor or lower
part of dishwasher tub.
Reconnect Power
24