KitchenAid KUDS30FXWH1 Installation Instructions Manual page 9

Slowly routewater s upply linethrough holein cabinet.
(If using copper t ubing,itwill bend andkinkeasily, sobe
gentle.) I t should befarenough intothecabinet opening
to connect ittothedishwasher inletonthefrontleft
sideofthedishwasher.
Slowly turnwater s hutoff v alve to "ON"position. Flush
waterintoashallow panuntilclear t ogetridofparticles
thatcould clogtheinletvalve. T urn shutoff v alve to
"OFF" position.
Copper tubing only:Slidenut,thenferrule, a bout1"
(2.5 cm)ontocopper t ubing.
NOTE: Toavoid vibration duringoperation, route the
watersupply linesothatit does nottouchthe
dishwasher base, f rame or motor.
Connect the3/8" compression fittingtothewatersupply
linepriorto installing t heunitintothecabinet opening.
Attach such thatthe3/4" connection isfacingupward as
shown above.
Copper tubingonly:Putthetubingintothe90 ° elbow
fittingasfarasit will go(thecopper t ubingbends and
kinks easily). Slide thenutandferrule forward andstart
thenutontotheelbowthreads.
Flexible braided c onnection: Secure nuttoelbowusing
%"open ended wrench or adjustable w rench.
NOTE: DonotuseTeflon ® ttapewithcompression
fittings.
t® Teflon is a registered trademark of E.I. Du Pont de Nemours and
Company,
9