KitchenAid KUDD01DSSS0 Installation Instructions Manual page 15

6. Ifneeded, youmay simply p ush thetoepanel back orforward
onthemounting rail.
7. With aPhillips s crewdriver, tighten t hetoepanel clamping
screws o nbothsides.
toe panel clamping
mounting rail screw
i
\
\
8. Plug in dishwasher or reconnect power.
1. Check to be sure all parts are now installed. If there is an
extra part, go back through the steps to see which step was
skipped.
2. Check to be sure you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. Read "Dishwasher Use" in the Drawer Dishwasher Use and
Care Guide.
If dishwasher does not operate, check the following:
[] Household fuse is intact and tight; or circuit breaker has not
tripped.
[] Electrical supply is connected.
[] See "Troubleshooting" in your Use and Care Guide.
15