KitchenAid KUDD01SS Specifications

PRODUCT MODEL SERIES
KUDD01SS
Electrical: 120-volt, 60 Hz, AC-only, 15 or
20 amp fused electrical supply is required. A
time-delay fuse or circuit breaker and separate
circuit is recommended.
Water: A hot water line with 4.3-145 psi
(30-1000 kPa) water pressure. Water temperature
must be minimum 120°F (49°C) at dishwasher. An
easily accessible valve with " compression
fitting must be installed in the hot water supply
line.
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
®
Single Drawer Dishwasher
OVERALL DIMENSIONS
CABINET DIMENSIONS
3
(9.7 cm)
Install the dishwasher in a cabinet cutout that is level, will hold weight
up to 104lbs. (47kg), and is in an area suitable for its size and use.
*
22 "
(57 cm)
16 "
20 "
(52 cm)
drawer open
If custom wood panels are to be used, the product depth is specified
*
with an " (18 mm) door panel thickness.
NOTE: Product shown with front panels for dimension purposes.
moisture protection
19 "
(50.5 cm)
Utility hole:
1 " (3.8 cm) dia.
" hole, either side –
immediately adjacent
to corner.
2 "
(6.7 cm)
22 " (58.0 cm)
23 "* (60.0 cm)
support surface must
be solid and level
These marks indicate the mounting tab screw locations.
Minimum thickness of cabinet/cavity sides –
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
23 "
(59.5 cm)
side
attaching
tabs
tape
4"
(10 cm)
16 "
(41.2 cm)
" (1.6 cm)
Ref. 8573714
02-03-06