ESI C-Plus User Manual page 67

User's Guide
Functions available during analog station voice mail message retrieval
Note: Functions tinted light gray, below, either change or are not available when you're using an ESI phone
(see page D.4).
Key Function
1 Pause
2 Hear time/date
4 Back up (rewind)
5 Access user programming
6 Move
7 Delete
8 Main greeting
9 Save
9 9 Save as new
0 Operator
# To other mailbox
To disconnect
Retrieving messages from another user's ESI phone
Press VOICE MAIL
Description
Pauses for one minute or until 1 is pressed again.
Pauses the message, plays the time/date of when the message was left
and resumes.
When pressed during message playback, rewinds 4 seconds for each keypress.
If pressed after the message has finished, it returns you to the beginning of
the message.
Accesses user programming menu.
Moves a copy of the message to another user's mailbox.
To move the message without an introduction, press 6 when prompted.
To add an introduction, press 1 when prompted. When you've finished your
recording, press 1 to stop; You will be returned to the original message in
your mailbox.
Deletes the message from the mailbox (see "Message Recycle Bin," page D.8).
Goes to the main greeting (if your system is using the built-in auto attendant).
Saves the message (it will be played as an old message the next time
messages are picked up).
Saves the message as new.
Transfers you to the operator.
To leave a message in another user's mailbox.
Always press
the message and any other unsaved messages).
and dial your extension number. Follow the procedures described on page G.5.
G.6
before hanging up (pressing it during message playback saves
Analog stations