ESI C-Plus User Manual page 50

User's Guide
8. Enter the number — including, if necessary, the line access code 9 (or 8 or 71–76). To insert a two-
second pause, press PAUSE.
Note: Use the
9. Press STOR to confirm the entry, which the phone will show briefly before returning to the Personal
Dex display.
10. To make another name/number entry, repeat steps 3–9. To finish, press BACK.
Deleting names from your Personal Dex
. . . On an ESI phone with a two-line display
1. While your station is idle (or just after receiving dial tone), repeatedly press ESI-DEX to select the
Personal Dex:
2. Choose the desired name from the Personal Dex, using one of two methods.
Either:
(a.) Scroll — Press the scroll keys (
the name (names will appear in the order in which they were stored in the Dex).
. . . Or . . .
(b.) Dial-by-name — Dial up to the first three characters
the listing for First International Bank, dial 3 4 7 (because it spells F I R). You'll begin to see
names that begin with those letters. You can then use the scroll keys (
the desired name and number.
3. When the desired name and number appears . . .
. . . delete the entry by pressing either
1
You can also dial just one or two characters, and then press # to enter.
scroll key to enter special characters; use the
can use the scroll keys to view the number after it's saved. To change the number, you must
delete it and then re-enter it as desired.
and
or HOLD.
F.6
scroll key to backspace. You also
) to look up and down through the Dex until you find
1
of the name. For example: to bring up
Special keys
and ) until you find