ESI C-Plus User Manual page 60

User's Guide
Record (Code 582)
Note: Available for only ESI Cordless Handsets and the legacy 12-Key Feature Phone.
Press this key to record any phone conversation — or, when the Cordless Handset is idle, to record a personal
memo. For more details on using your ESI system's call recording features, refer to "Live recording," page D.6.
™
Quick Switch (Code 583)
Note: Not available on an ESI Cordless Handset or legacy 12-Key Feature Phone.
Important: For the Quick Switch feature to work, your Installer or System Administrator must have programmed a
relationship between your desktop extension and Cordless Handset. Program the key on the ESI
desktop phone.
Press this key to transfer an active call between a desktop ESI Feature Phone and an ESI Cordless Handset
(either direction — to or from the ESI desktop phone).
Quick Switch ring options
When both the desktop extension and Cordless Handset are idle, press the Quick Switch key. Follow the
visual and audible prompts and use the scroll keys to change the programmable options concerning what
happens when a caller dials (or is transferred to) either your desktop phone or Cordless Handset:
• RING DESKTOP — Only the desktop phone will ring.
• RING CORDLESS — Only the Cordless Handset will ring.
In either of the two cases above, re-routing (including to a voice mailbox) will follow the desktop phone.
The other choice is:
• NO RING OPT — If a caller dials (or is transferred to) the desktop phone, only that phone rings. If the
caller dials (or is transferred to) the Cordless Handset, only the Cordless Handset rings. Re-routing
follows whichever phone rang.
(Continued)
F.16
Special keys