ESI C-Plus User Manual page 47

User's Guide
. . . On an ESI phone with a three-line display
1. While your station is idle (or just after receiving dial tone), press ESI-DEX. This causes the Esi-Dex
menu to appear, as shown:
2. Press a key to choose the appropriate Dex —Station Dex (STA), System Dex (SYS), or Personal
Dex (PER) — or press RELEASE to cancel the procedure.
Notes: System Dex isn't available on every system.
The display now reads:
3. Choose the desired name from the selected Dex, using one of two methods.
Either:
(a.) Scroll — Press the scroll keys (
the name (names will appear in the order in which they were stored in the Dex).
. . . Or . . .
(b.) Dial-by-name — Dial up to the first three characters
mailbox name. For example: if you want to call John Doe, dial 5 6 4 (because it spells J O H).
You'll begin to see names that begin with those letters. You can then use the scroll keys (
and
4. Press DIAL to place the call.
1
You can also dial just one or two characters, and then press # to enter.
For the remainder of this example, we'll assume you selected Personal Dex. However, the
procedure is the same for any of the other Dexes.
) until you find the desired name and number.
and ) to look up and down through the Dex until you find
1
of the extension, department, or guest
F.3
Special keys