Toshiba Strata AirLink User Manual page 57

To change a remote forwarding destination number
If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
1. Call into the Strata
DK system over a CO
line programmed for
DISA.
2. After you get dial
tone, press
your [PDN].
3. Enter the Remote
CF–External security
code.
4. Enter the new
destination.
5. Press
Strata AirLink Integrated Wireless Handset 5/00
You hear ringback tone signal, then internal dial
tone for 10 seconds. Try again if you hear busy tone.
Note
You hear a confirmation tone.
+
If a number is not dialed, the system automatically
makes the DISA CO line ring as a normal incoming
call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
You hear a confirmation tone. See the System
Administrator for the security code that is assigned
to your handset in system programming.
Notes
+ . You hear a confirmation tone.
See the System Administrator for DISA
telephone numbers.
You can enter an internal number, Voice Mail
number, or a CO line access code + an external
telephone number.
With some systems, you can dial a line group
code instead of a CO line number access code.
(See "CO Line Access
access code information.)
Digital Features
Call Forward (CF)
Codes"on Page 109 for
45