Table of Contents
Advertisement
Image Density
When you touch
Exposure
exposure level or image density. There are two ways to adjust the exposure level. Select one
according to your need.
Auto Exposure
When in the Auto Exposure mode, the
copier reads the image density of the
original and automatically adjusts the
exposure level for the optimum copy
image density.
Touch
.
Auto
1
The
key is highlighted,
Auto
indicating that the copier is set into the
Auto Exposure mode.
Lighter
Useful Tips
•
The exposure level in the Auto
Exposure mode can be varied by using
the User's Choice, either "Darker" or
➭
"Lighter."
p. 119
•
The copier has been factory-set to
automatically select the Auto
Exposure mode. The User's Choice
can be used to change this default
setting to the Manual Exposure mode.
➭
p. 119
on the Touch Panel, a screen appears that allows you to set the
Auxiliary
Finishing
Ready to copy.
Auto Expo.
Lighter
Auto
Darker
1134P248CA
1134P248CA
Orig.
Copy
Basics
1
x1.000
Auto Paper
Auto
Darker
1134P222CA
1134P222CA
Manual Exposure
In the Manual Exposure mode, you can
vary the exposure level in nine steps.
Touch
Lighter
1
necessary.
Lighter
1134P249CA
<To make the image darker>
Touch
<To make the image lighter>
Touch
7. Basic Functions
or
as
Darker
Darker
Auto
1134P249CA
.
Darker
.
Lighter
45
Advertisement
Table of Contents
