Copier Parts And Their Operation; Outside The Copier; Inside The Copier - Minolta CSPRO EP1031 Manual

6

1. Copier Parts and Their Operation

Outside the Copier

2
1
1 Copy Tray
2 Main Switch
3 Control Panel
4 Front Door
5 Multi Bypass Tray
6 Multi Bypass Tray Extender : Flip this Extender out when making copies on large size paper.
7 Right Door
8 Drawer

Inside the Copier

1 Imaging Unit
2 Fusing Unit Cover
3 Lock Release Lever
3
4
C1159O004DA
: Holds the copies fed out of the copier.
: Use to turn on and off the copier. (See page 9.)
: Use to make various copy job settings and start a copy cycle.
(See page 8.)
: Open only for the following:
Replenish toner (See page 32.)
Remove a paper misfeed (See page 36.)
: Thick paper, transparencies and other special materials can be placed
here. And also, up to 30 sheets of plain copy paper can be placed here.
(See page 19.)
: Open to clear a paper misfeed.
: Holds up to 250 sheets of copy paper.
3
1
2
: Remove the screws and remove the unit. (These are special screws
which must be removed by a service representative.)
: Hold onto this cover when lifting the Upper Unit of the Fusing Unit.
: Turn clockwise to swing up the Upper Unit of the copier to clear a
paper misfeed.
8
C1159O003EA
5
6
7
C1159O005DA