Hdd Management; Managing Hdds - HIKVISION C Series User Manual

C Series DVR User Manual

11.1 Managing HDDs

A newly installed hard disk drive (HDD) must be first initialize before it can be used with your
DVR. Initializing the HDD will erase all data on it.
To initialize a HDD:
1. Enter the HDD Management menu by clicking Menu > HDD Management.
2. Select HDD to initialize.
3. Click the Init button.
4. Select OK button to begin initialization. After the HDD has been initialized, the status of the
HDD will change from No to Yes.
To check the status of a HDD:
1. Enter the HDD Management menu by clicking Menu > HDD Management.
2. The status of your HDD is listed under the Status column. If the status is listed as Yes, the
HDD is in working orde
used in your DVR. Please refer to Initializing HDDs for further instructions.

11 HDD MANAGEMENT

r. If the HDD is Uninitialized, you will need to
45
initialize it before it can be