Brother DCP-J100 User Manual page 39

d
Lift the scanner cover (1) to release the
lock. Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
2
CAUTION
Be careful not to pinch your fingers when
you close the scanner cover.
e
Open the ink cartridge cover.
f
Press the ink release levers to release
the ink cartridges, and then take out the
ink cartridges.
(See Basic User's Guide: Replacing the
ink cartridges.)
1
3 3
Routine maintenance
g
Install the orange protective part, and
then close the ink cartridge cover.
IMPORTANT
• Make sure the plastic tab on the left side
of the orange protective part (1) locks
securely into place (2).
1
• If you are not able to find the orange
protective part, ship the machine without
it. DO NOT install the ink cartridges as an
alternative before shipping.
2
35
A