Beep Volume; Speaker Volume; Automatic Daylight Saving Time (Mfc Model) - Brother DCP-J100 User Manual

Chapter 1

Beep Volume

When Beep is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax.
You can choose a range of sound volume
levels, from High to Off.
a
Press Menu, 2, 4, 2.
b
Press a or b to choose Low, Med, High
or Off.
Press OK.
c
Press Stop/Exit.

Speaker Volume

You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu, 2, 4, 3.
b
Press a or b to choose Low, Med, High
or Off.
Press OK.
c
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook.
a
Press Hook.
b
Press d or c
Each key press changes the volume to
the next setting. This setting will stay
until you change it again.
c
Press Hook.
2
1
1
.
Automatic Daylight
Saving Time
(MFC model)
You can set the machine to change
automatically for daylight saving time. It will
set itself forward one hour in the Spring and
backward one hour in the Fall. Make sure you
have set the correct date and time in the
Date&Time setting.
The factory setting is Off, so you will have to
turn on Automatic Daylight Saving Time as
follows.
a
Press Menu, 0, 1, 2.
b
Press a or b to choose On (or Off).
Press OK.
c
Press Stop/Exit.
1