Advertisement
HooverCaptor6
1/9/04
WARNING: Always switch off and remove the power plug from the
electrical supply before cleaning or attempting user maintenance as described
in these instructions.
PROBLEM
Cleaner will
not run
Cleaner will
not pick-up,
or low suction
Dust escaping
from cleaner
Cleaner Tools
will not pick
up
Turbonozzle
will not run
CONSUMABLE PARTS: For consumables please quote the following pack
numbers: Replacement Filter pack No.
GUARANTEE STATEMENT
Your new appliance is fully guaranteed for 12 months against electrical/
mechanical breakdown excluding:
a) Any faults which occur due to incorrect installation or misuse of the
machine or accidental damage.
b) Repair of, or interference with the machine by any person not authorised
by the manufacturer to carry out service.
c) Any parts which are fitted to the machine which are not original
manufacturers parts.
d) Non-domestic use of the machine.
e) Operation at incorrect voltage.
The guarantee applies to Great Britain and Northern Ireland only.
The aforegoing does not affect your statutory rights.
9:48 am
Page 6
TROUBLESHOOTING GUIDE
POSSIBLE REASONS
1. Power cord not plugged
into socket.
2. Service required.
1. Dust Container not
fitted correctly.
2. Dust Container full.
3. Filter clogged.
1. Dust Container full.
2. Dust Container not
fitted correctly.
3. Filter not fitted correctly
4. Filter clogged.
1. Hose clogged.
2. Dust Container full.
3. Filter clogged.
1. Turbonozzle clogged.
2. Filter clogged.
POSSIBLE SOLUTIONS
1. Insert plug firmly into socket.
2. Contact GIAS Customer Services.
08705 400600
1. Review Dust Container
Removal & Replacement.
2. Empty Dust Container.
3. Remove and clean Filter.
1. Empty Dust Container.
2. Remove Dust Container
Removal & Replacement.
3. Review Filter installation.
4. Clean or replace filter.
1. Remove Hose & Tools - remove
obstruction.
2. Empty Dust Container.
3. Remove and clean filter.
1. Switch cleaner off. Remove
Turbonozzle and inspect for
blockage.
2. Clean or replace filter.
6
Advertisement
