KitchenAid KERS507XSS02 Installation Instructions Manual page 7

E/®ct 'c(x ................
Power Supply Cord
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Direct Wire
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1=
2.
Disconnect power.
Use Phillips screwdriver to remove the terminal block cover
screw located on the back of the range. Pull cover down and
toward you to remove cover.
Style 1: Power supply cord strain relief
• Assemble a UL listed strain relief in the opening.
Ii
Ii
i
ii
;i
...... ---i•[
//
//
3=
Remove plastic tag holding three 10-32 hex nuts from the
middle post of the terminal block.
A. UL listed strain refief
Feed the power supply cord through the strain relief in the
cord/conduit plate on bottom of range. Allow enough slack
to easily attach the wiring to the terminal block.
• Tighten strain relief screw against the power supply cord.
4. Add strain relief.