KitchenAid YKERC608LS0 Installation Instructions Manual page 6

lore Move range close to cabinet
opening. Make electrical connection. See
"Electrical requirements" and "Electrical
connection" sections for details. "8888"
should appear in the clock display. Refer
to Use and Care Guide for information on
electronic controls.
[] Remove cardboard or hardboard
from under range. Carefully move range
into final position.
_ Press on front of storage
drawer and release to open. Pull open to
first stop position. Lift front of drawer to
clear white wheels in drawer guides.
Remove drawer and set it aside on a
protected surface.
_ Place rack in oven. Place level
on rack, first side to side; then front to
back. If the range is not level, pull range
forward until the rear leveling leg is
removed from the anti-tip bracket. Adjust
the leveling legs up or down.Then slide
range back into position. Check that
leveling leg is engaged in anti-tip bracket.
NOTE: Oven must be level for satisfactory
baking conditions.
[] Insert storage drawer into slide
rails on sides of drawer opening. Lift
front of drawer slightly and push firmly
to close drawer.
[] Plug in range.
[] Look under range (a flashlight
may be needed) to check that left rear
leveling leg is engaged in the anti-tip
bracket. If leveling leg is not properly
engaged, remove and reposition the anti-
tip bracket to ensure that the leveling leg
fits properly in the anti-tip bracket.