Getting Started - RTI T2+ Operation Manual

T2+ Universal System Controller
If the T2+ battery capacity is reduced to approximately one hour
of remaining run-time, a low battery icon will appear in the upper
left corner of the display:
The docking station LED illuminates to indicate a charge in
progress. The LED will turn off when the battery in the unit is
fully charged.
A fully discharged battery will take approximately 2-4 hours to
completely re-charge.
The T2+ can remain in the docking station indefinitely without
damage to the battery.

GETTING STARTED

Start by inserting the battery connector into the mating plug on
the T2+. Make sure the connector is oriented properly before
attempting to insert it.
The T2+ is powered-up by touching any area of the display or any
keypad button. If the tilt sensor is enabled, picking up the unit
will also turn it on.
6