Using The Ir Remote Control - HIKVISION DS-7300HI-S Series User Manual

HIKVISION DS-7300HI-S User‟s Manual
•
DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and
items in menus. In Playback mode, the Up and Down button is used to speed up and slow down
recorded video. The Left and Right button will jump 30s backward and forward in a video. In
Preview mode, these buttons can be used to cycle through channels.
•
ENTER Button: The ENTER button is used to confirm selection in any of the menu modes. It can
also be used to tick checkbox fields. In Playback mode, it can be used to play or pause the video. In
Single Play mode, pressing the ENTER button will advance the video by a single frame.
5. JOG SHUTTLE Control: The JOG SHUTTLE control can be used to move the active selection in a
menu. The inner ring will move the selection up and down; the outer ring will move it left and right.
In the Playback mode, the outer ring is used to jump 30s forward/backward in video files. The inner
ring can be used to speed up/slow down the video. In Preview mode, it can be used to cycle through
different channels.
6. POWER Button: The POWER button is used for power on or power off the DVR.
Note:
It is important to note that you must click the EDIT button on either the remote or front panel on a text field
before you‟re able to edit its content. After you‟re done entering text, you must hit the ENTER button to be able to
move on to the next field.

Using the IR Remote Control

Your DVR may also be controlled with the included IR remote control, shown in Figure 5.
Batteries (2x AAA) must be installed before operating.
12