Service fluids and capacities
220
Capacities
Components
Engine with oil
filter
Cooling system
Fuel tank
Fuel tank
reserve
Air
conditioning
system*
Windshield
washer system
Engine oils
Engine oils are specifically tested for
their suitability in our engines and
durability for our service intervals.
Therefore, only use engine oils and oil
filters required for vehicles with the
Maintenance System. For a listing of
approved engine oils and oil filters
contact an authorized smart center.
! Using engine oils and oil filters of
specification other than those expressly
required for the Maintenance System, or
changing of oil and oil filter at change
intervals longer than those called for by
the Maintenance System will result in
engine or emission control system
damage not covered by the smart Limited
Warranty.
Use a windshield washer concentrate labeled for summer and water for temperatures above freezing
27
point or a windshield washer concentrate labeled for winter and water for temperatures below freezing
point.
Model
Capacity
All models
3.5 US qt (3.3 l)
All models
approx. 4.5 US qt (4.3 l)
All models
8.72 US gal (33.0 l)
All models
approx. 1.32 US gal (5.0 l)
All models
—
All models
4.0 US qt (3.8 l)
Fuels, coolants, lubricants,
etc.
Approved engine oils
Anticorrosion/Antifreeze
meeting specification
MB 325.0
Premium unleaded gasoline
(Minimum Posted Octane 91
[Avg. of 96 RON/86 MON])
R134a refrigerant and
special PAG lubricant oil
(never R 12)
Windshield washer
concentrate
Washer fluid mixing ratio
(
page 222)
Y
Please follow Maintenance System
recommendations for scheduled oil
changes. Failure to do so will result in
engine or emission control system
damage not covered by the smart Limited
Warranty.
Viscosity grades for engine oils
Using the chart below, select oil viscosity
according to the lowest air temperature
expected before the next oil change.
27
(
page 222)
Y
* optional