Download  Print this page

Advertisement

Table of Contents
the TPMS from functioning properly. Always
check the TPMS malfunction telltale after
replacing one or more tires or wheels on
your vehicle to ensure that the replacement
or alternate tires and wheels allow the
TPMS to continue to function properly.
i
If a condition causing the TPMS to
malfunction develops, it may take up to
10 minutes for the system to signal a
malfunction using the TPMS telltale
flashing and illumination sequence.
The telltale extinguishes after a few
minutes driving if the malfunction has
been corrected.
i
Operating radio transmission
equipment (e.g. wireless headsets, two-
way radios) in or near the vehicle could
cause the TPMS to malfunction.
i
USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful
R
interference, and
this device must accept any
R
interference received, including
interference that may cause undesired
operation.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
i
Canada only:
This device complies with RSS‑210 of
Industry Canada. Operation is subject to
the following two conditions:
This device may not cause
R
interference, and
this device must accept any
R
interference received, including
interference that may cause undesired
operation of the device.
Tires and wheels
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
Restarting the TPMS
G
WARNING
It is the driver's responsibility to
calibrate the TPMS on the recommended
cold inflation pressure. Underinflated
tires affect the ability to steer or brake
and might cause you to lose control of the
vehicle.
When you restart the TPMS, the system sets
new reference values for each tire.
The TPMS must be restarted when you have
adjusted the tire inflation pressure to a
new level (e.g. because of different load or
driving conditions). The TPMS is then
recalibrated to the current tire inflation
pressures.
Using the Tire and Loading Information
X
placard on the driver's door B‑pillar
(
page 131), make sure the tire
Y
inflation pressure of all four tires is
correct.
i
Restart the TPMS after adjusting the
tire inflation pressure to the inflation
pressure recommended for the vehicle
operating condition. Tire pressure
should only be adjusted on cold tires.
Observe the recommended tire inflation
pressure on the Tire and Loading
Information placard on the driver's door
B‑pillar (
page 131).
Y
129
Z

Advertisement

Table of Contents

   Also See for Smart Fortwo coupe

   Related Manuals for Smart Fortwo coupe

This manual is also suitable for:

Fortwo cabrioletFortwo cabriolet

Comments to this Manuals

Symbols: 0
Latest comments: