Storing Driving Positions - PEUGEOT RCZ Handbook

STORING DRIVING POSITIONS

System which takes into account the electrical settings of the driver's
seat and the door mirrors. It enables you to store two positions using
the buttons on the side of the driver's seat.
STORING A POSITION
Using buttons M / 1 / 2
Switch on the ignition.
Adjust your seat and your door mirrors.
Press button M , then press button 1 or 2 within four seconds.
An audible signal is heard indicating that the settings have
been stored.
Storing a new position cancels the previous position.
RECALLING A STORED POSITION
Using button 1 or 2
Press and hold button 1 or 2 until the audible signal is heard
indicating the end of the adjustment.
When the ignition is off, after a few consecutive position recalls,
the function will be deactivated until the engine is started, to
prevent discharging of the battery.