Storing Driving Positions - PEUGEOT 308 Handbook

Comfort

Storing driving positions

System which registers the electrical settings
of the driver's seat and door mirrors. It enables
you to store and recall two positions using the
buttons on the side of the driver's seat.
78
Storing a position
Using buttons M / 1 / 2
 Switch on the ignition.
 Adjust your seat and the door mirrors.
 Press button M , then press button 1 or 2
within four seconds.
An audible signal indicates that the position
has been stored.
Storing a new position cancels the previous
position.
Recalling a stored position
Ignition on or engine running
 Press button 1 or 2 to recall the
corresponding position.
An audible signal confirms that adjustment
is complete.
You can interrupt the current movement by
pressing button M , 1 or 2 or by using one of the
seat controls.
A stored position cannot be recalled while
driving.
Recalling stored positions is deactivated
45 seconds after switching off the ignition.