PEUGEOT RCZ Handbook page 29

Warning lamp
fi xed, alone
or associated
with another
warning lamp,
STOP
accompanied by
an audible signal
and a message
in the screen.
fi xed, associated
with the STOP
warning lamp.
Braking
+
fi xed, associated
with the STOP
and ABS warning
lamp.
Maximum fi xed with the
coolant needle in the red
temperature zone.
is on Cause
Illumination of this warning
lamp is associated with a
serious braking system, power
steering, engine lubrication or
cooling system malfunction or a
punctured tyre.
The braking system fl uid level is
too low.
The electronic brake force
distribution (EBFD) system has
a fault.
The temperature of the cooling
system is too high.
Action / Observations
Stop as soon as it is safe to do so as there is a risk that the
engine will cut out while driving.
Park, switch off the ignition and contact a PEUGEOT
dealer or a qualifi ed workshop.
You must stop as soon as it is safe to do so.
Top up with brake fl uid recommended by PEUGEOT.
If the problem persists, have the system checked by a
PEUGEOT dealer or a qualifi ed workshop.
You must stop as soon as it is safe to do so.
Have it checked by a PEUGEOT dealer or a qualifi ed
workshop.
Stop as soon as it is safe to do so.
Wait until the engine has cooled down before topping up
the level, if necessary.
If the problem persists, contact a PEUGEOT dealer or a
qualifi ed workshop.