PEUGEOT RCZ Handbook page 142

DISPLAYS IN THE INSTRUMENT PANEL
The programmed information is grouped together in the instrument
panel screen.
5. Cruise control off / resume indication.
6. Cruise control mode selection indication.
7. Programmed speed value.
PROGRAMMING
Turn dial 1 to the "CRUISE" position: the cruise
control mode is selected but is not switched on
(OFF / Pause).
Set the programmed speed by accelerating to
the required speed, then press button 2 or 3
(e.g.: 70 mph (110 km/h)).
You can then change the programmed speed using
buttons 2 and 3 :
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
Switch off the cruise control by pressing
button 4 : the display confi rms that it has been
switched off (OFF / Pause).
Switch the cruise control back on by pressing
button 4 again.