Removing The Wheel - PEUGEOT RCZ Handbook

REMOVING THE WHEEL

Remove the cover on each of the bolts using the bolt cover removal
tool.
Fit the security socket on the wheelbrace to slacken the security
bolt.
Slacken the other bolts using the wheelbrace only.
Place the jack in contact with one of the two front A or rear B
locations provided on the underbody, whichever is closest to the
wheel to be changed.
Extend the jack until its base plate is in contact with the ground.
Ensure that the centreline of the jack base plate is directly below
the location A or B used.
Raise the vehicle until there is suffi cient space between the wheel
and the ground to admit the spare (not punctured) wheel easily.
Remove the bolts and store them in a clean place.
Remove the wheel.