Setting Up The Projector; Setting Items - Sony VPL-CX76 Operating Instructions Manual

Setting up the projector

1
Insert the supplied wireless LAN card
into the slot of the projector.
For details, see page 6.
2
Turn on the projector.
3
Press the AIR SHOT key on the
remote commander.
The home display of Air Shot Version 2
appears.
4
Press the ENTER key.
The setting menu display appears.
Air Shot
Wireless Network
Simple Mode
Network Mode:
Manual Mode1
Network Name(SSID):
Manual Mode2
Network Authentication:
Manual Mode3
Data Encryption:
802.1x Authentication:
Manual Mode4
Internet Protocol(IP)
Manual Mode5
IP Address Setting:
IP Address:
System Setup
Subnet Mask:
Exit
Default Gateway:
5
Click the desired [Manual Mode] and
then select [Setup] to set network

setting items.

Projector Setting Items
When the ENTER key is pressed in the home
display of Air Shot Version 2, the initial
display of Air Shot 2 setting menu appears.
In the initial display, you can switch the
mode to be used and change each mode
settings.
Air Shot
Wireless Network
Simple Mode
Network Mode:
Manual Mode1
Network Name(SSID):
Manual Mode2
Network Authentication:
Manual Mode3 Data Encryption:
802.1x Authentication:
Manual Mode4
Internet Protocol(IP)
Manual Mode5
IP Address Setting:
IP Address:
System Setup
Subnet Mask:
Exit
Default Gateway:
12
Wireless Connection
Using the software keyboard
When inputting characters or numbers, the
software keyboard is displayed.
1
2
3
To delete the character locating one
Ad-hoc(Peer-to-peer)
space before the cursor
AIRSHOT1000014
Open
S
WEP
Disable
press the ENTER key.
Auto
To redo the input from the beginning
S
press the ENTER key.
To enter a space
S
press the ENTER key.
Ad-hoc(Peer-to-peer)
AIRSHOT1000014
Open
WEP
Disable
Auto
Select a character with the v/V/B/b
buttons and then press the ENTER
key.
The selected character is displayed at the
cursor position in the display column.
Repeat step 1 to input characters.
After you input the rest of the
characters, select [OK] with v/V/B/
b button and press the ENTER key.
Input characters are entered and the
software keyboard is closed.
elect [Delete] with v/V/B/b button and
elect [Clear] with v/V/B/ b button and
elect [Space] with v/V/B/b button and